Biking is a pastime, done to get about. Some ride just for fun, while others need transportation. Regardless, some maintenance must occur constantly on that bike of yours. A well-cared-for, serviced regularly two-wheeler will be more enjoyable to ride because it will run better and deliver firm, quality riding. It will also be a safer bet.
Here are some bike care suggestions to ensure a smooth ride.
1. Read The Bike Manual
There comes a user guide with the bicycle having details on every part of it, including the method for keeping and running those parts. The bike owners are required to read the guidebook. The handbook will give you an extensive explanation of your whole bicycle and the servicing strategy of each and every part of the bicycle. It will help you know which components to service according to oil type and maintenance schedule. You are supposed to read the user guide keenly and then follow the instructions.
2. Engine Oil Replace
The Engine oil is responsible for making either a smoother ride or one that does not go by smoothly with it. Since it is by burning fuel, thus producing more heat that is likely to burn out the other parts that comprise the engine, always ensure that one checks often as it not only lubricates but also works to keep cool the internal parts. While dirty oil diminishes your cars longer life cycle and consumes excess fuel too, it could also attract corrosion inside once its acidity builds up at an alarmingly high rate. Always check for any possible leaks of oil besides quality and the number of engine oil. Carbon deposits might also thicken the oil, meaning more friction with the insides of the engine for this to move freely.
3. Check the pressure of the Air
Look at some scratches or scrapes on the tyre; if nothing seems to have happened to those, sometimes the air knocks them off. It can come out of the tyre on your bike if you travel often on the outskirts and the roads are bad or if your bike is too old. For this bicycle tyre to maintain a frictional grip on the road on braking, the size should be proper for the thread on the tyre. A two-wheeler will skid and result in an accident if you ride a bike with a worn-out tyre thread.
4. Clean Air Filter
Indian roads are always covered with dust, and that is why your bike's air filters get clogged. If you want the utmost efficiency, you have to keep the air filters clean all the time and change them at the recommended time.
5. Lubricate The Chains
A two-wheeler chain must be regularly cleaned, oiled, and adjusted. A chain may be cleaned using paraffin. Do not clean the chain in water, as this may rust the links of the chain. Instead, use a small cotton piece and a soft brush. You can use motor oil to lube the chain. Any deviation will not propel the back wheel smoothly, so your bike chain should have the correct tension and free play.
6. Inspect the Brake
You can avoid fatal injuries through the proper application of brakes. As such, ensure that the brakes holding the tyre are placed at the correct distance apart and not tight or slack. Brake pads wear off with time, and if this screeching noise continues, you must replace it. Checking brake fluid is another important task. Ensure you change the brake fluid every quarter.
7. Regular Service
A bike service is like a health examination, checking everything right from the clutch to the battery. Some of them are either rectified or replaced to achieve the desired result. Weather conditions heavily affect the performance of the bike. Extreme heat, severe cold, or even wet tarmac can prove to be detrimental to the performance as well as the condition of a bike. Regular check-ins at the service centre for your bike will ensure smooth running, extended lifespan, and safety. In addition to these benefits, frequent maintenance reduces the possibility of any mechanical issues.
No Comments